SEAT Workshop Service and Repair Manuals

• To top of radiator
• ◆ , Item 4
• O-ring
• ◆ Renew
• 10 Nm
• Connection
• Retaining clip
• Coolant temperature sender (G62)
• ◆ With coolant temperature gauge sender (G2)
• To heat exchanger
• From heat exchanger
• Bracket
• Coolant pipe

• Cap
• ◆ Check with coolant system tester V.A.G 1274 and adapter 1274/1A
• ◆ Test pressure 1.4...1.6 bar
• Expansion tank
• Connector
• ◆ Black, 2 pin
• Oil cooler
• ◆ Removing and installing
  , Item 15
• From bottom of radiator
• ◆ , Item 7
• 20 Nm + 1/4 turn (90 °) further
• ◆ Renew
• Bracket
• ◆ For alternator

• 30 Nm
• V-belt/ribbed belt
• ◆ Removing and installing ribbed belt
• ◆ Adjusting V-belt tension:

=> Running gear; Repair group 48; Assembly overview: vane pump, reservoir

• Coolant pump
• ◆ Dismantling and assembling => Page 19-8
• Connector
• ◆ Brown, 4 pin
• Air conditioner cut-off thermo switch (F163) and radiator fan 3rd speed thermo switch (F165)
• ◆ On vehicles with air conditioning

=> Heating, air conditioning; Repair group 87