Servicing ignition system
General notes on ignition system
-
◆ Only the components which specifically relate to the ignition system are dealt with here. For the other components of the injection and ignition system.
=> Repair group 24
-
◆ The engine control unit is equipped with self diagnosis.
-
◆ Components marked with * are checked via the self diagnosis.
, interrogating fault memory
-
◆ For trouble-free operation of the electrical components a voltage of at least 11.5 V is necessary.
-
◆ During some checks it is possible that the control unit will recognise and store a fault. Therefore after completing all checks and repairs the fault memory must be interrogated and if necessary erased.
=> Page 01-18, interrogating fault memory
Safety precautions => Page 28-5
Test data, spark plugs => Page 28-7
|