seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Checking functions > < Evaluating measured value blocks, display groups 14...99
Motronic injection and ignition system (4-Cyl.)
Servicing injection system
Fitting locations overview
  • Activated charcoal filter
    • ◆ Location: in front right wheel housing
    • ◆ Activated charcoal filter system

=> Repair group 20; Activated charcoal filter system

  • Activated charcoal filter solenoid valve 1 (N80)
    • ◆ Activated charcoal filter system

=> Repair group 20; Activated charcoal filter system

  • Air mass meter (G70)
  • Ignition coils (N, N128, N158 and N163)
    • ◆ , item 9
  • Charge pressure limitation solenoid valve (N75)
    • ◆ Charge pressure system:

=> Repair group 21; Checking charge pressure system; Checking charge pressure limitation solenoid valve

 
N24-0807
  • Combi valve
    • ◆ For secondary air system

=> Repair group 26; Secondary air system

  • Secondary air inlet valve (N112)

=> Repair group 26; Secondary air system

  • Altitude sender (F96)
  • Output stage (N122)
    • ◆ , item 2
  • Engine control unit
    • (Motronic control unit -J220)
  • 4 pin connector
    • ◆ Black for Lambda probe 1 (G39)
    • ◆ Left on underside of vehicle
  • Speedometer sender (G22)
  • Coolant temperature sender (G62)
 
N24-0807
  • Engine speed sender (G28)
    • ◆ Inductive sender
  • Throttle valve control part (J338)
  • Intake air temperature sender (G42)
  • Fuel pressure regulator
  • 3 pin connector
    • ◆ Brown for knock sensor 1 (G61)
    • ◆ Black for knock sensor 2 (G66)
    • ◆ Grey for engine speed sender (G28)
  • Injector (N30...N33)
  • Fuel rail
  • Secondary air pump
    • ◆ With engine (V101)

=> Repair group 26; Secondary air system

 
N24-0807
  • Hall sender (G40)
    • ◆ , item 18
  • Air cleaner
  • Earth strap
    • ◆ Connection engine/body

Checking functions > < Evaluating measured value blocks, display groups 14...99