SEAT Workshop Service and Repair Manuals

Dust and pollen filter: removing and installing 1 -  Plenum chamber cover 2 -  Cover 3 -  Dust and pollen filter cover 4 -  Dust and pollen filter 5 -  Plastic nut, 2.5 Nm 6 -  Filter bracket Removing

–  In the plenum chamber cover, to the right, pull upwards of the rubber gasket -1- until you reach the center of the vehicle. –  Unlock the locking clips -arrows- of the plenum chamber cover and remove the cover -2-.

–  Pull the cover -1- in the direction indicated by the -arrows-, separate the clips -A- from the filter housing in the same direction -arrows- and remove upwards the filter cartridge with a mark. –  Remove from the frame the filter cartridge. Installation

–  Introduce right and left borders of the frame in the first plastic -arrows- of both sides of the new cartridge.

–  Introduce the clips of the frame -1- in their cooresponding seats of filter housing and press the frame with the cartridge downwards.

–  Mount the plenum chamber cover -2- and fit the locking clips -arrows-. –  Place the rubber gasket -1-.