seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Main board for the heating controls: removing and installing > < Heating control: operation, removing and fitting

Leon Mk1

Removing
Removing
   
–  Fit the rotating control for temperature selection -A- in the position “cold limit”.
–  Remove the glove compartment → Bodywork, interior fitting work; Rep. Gr.68.
–  Remove the vent from the foot well area on the passenger side.
–  Replace the Heating control unit -J65- → Chapter.
  E80-10010
–  Release the flexible shaft insert -H-.
–  Release the insert -D- for the Bowden cable sheath -E- and remove the Bowden cable sheath from the allotment.
  E80-10008
–  Release the ball on the Bowden cable -F- from the operation lever -G-.
–  Remove the main board from the centre console.
  E80-10008

Main board for the heating controls: removing and installing > < Heating control: operation, removing and fitting