Leon Mk1
Intercooler system components: removing and installing |
Note!
t | All the hoses are fixed with clamps. |
t | The supercharging system must be airtight. |
t | For removing and installing the strip clamps use the -T20029-. |
1 - | Intercooler |
2 - | Connection hose |
3 - | 10 Nm |
4 - | Support |
q | For connection line |
q | Bolted to the oil sump |
5 - | Connection line |
6 - | Connection hose |
q | Connection line/turbocompressor |
7 - | Connection hose |
q | Connection line/intake hose |
8 - | Intake manifold temperature sender -G72- |
q | Test → Chapter |
9 - | 3 Nm |
10 - | O-ring |
q | Replace if worn |
11 - | Connecting sleeve |