Leon Mk1
| Front exhaust section with the catalytic converter and silencer - assembly overview |
| 1 - | Seal |
| q | Renew |
| 2 - | 25 Nm |
| q | Renew |
| 3 - | Forward section of the exhaust tube with catalytic converter |
| q | The vibration shock absorbing element in the front exhaust pipe must not be bent more than 10° - otherwise they can be damaged. |
| 4 - | Suspension |
| q | With retaining ring |
| q | If this is damaged, replace it |
| 5 - | Tunnel cross-piece |
| 6 - | 25 Nm |
| 7 - | Double clamp for repairs |
| 8 - | 40 Nm |
| 9 - | Suspension |
| q | With retaining ring |
| q | If this is damaged, replace it |
| 10 - | Suspension |
| q | With retaining ring |
| q | If this is damaged, replace it |
| 11 - | Separating point |
| q | The exhaust tube and the pre-silencer come from the factory as one piece. In repair cases the front and rear silencer are supplied individually with a double clamp for connecting them. |
| q | Marked with three traces on the circumference of the exhaust tube |
| q | Cutting the exhaust tube perpendicularly in the marked zone → Chapter |
