When carrying out work on the fuel supply system/injection system, strictly follow the following „cleanliness rules“: |
l
| Thoroughly clean all joints and connections and the surrounding areas before dismantling. |
l
| Place removed parts on a clean surface and cover. Use only lint-free cloths. |
l
| If repairs cannot be completed in one session, all parts and components that are left open should be covered or stored with the greatest of care |
l
| Only fit clean parts: only remove replacement parts from packaging immediately prior to installation. |
l
| Do not use parts that have been stored loose (e.g. in tool boxes etc.). |
l
| If the system is open: Avoid using compressed air when possible. Do not move the vehicle unless absolutely necessary. |
l
| Also, be extremely careful not to spill petrol on the coolant hoses. If necessary, immediately clean the tubes. Damaged hoses must be replaced. |
|
|
|