Leon Mk1
Activated charcoal filter system removing and installing |
1 - | Breather pipe |
q | From the activated charcoal filter solenoid valve -N80- (in engine well) |
q | Ensure tight fit |
2 - | Breather pipe with pressure retention valve |
q | From the gravity valve on the fuel tank |
q | Ensure tight fit |
3 - | Activated charcoal filter system |
q | Location: in rear right wheel housing |
q | Filled by gravity valve and solenoid valve -N80- |
q | To remove the tank: |
l | Remove right-hand rear wheel. |
l | Separate wheel arch protection |
l | Remove hoses - → Item and → Item |
l | Remove bolt - → Item and detach the cannister from below |
4 - | Breather opening |
q | Visible from below |
5 - | 10 Nm |
6 - | Throttle valve control unit |
7 - | Solenoid valve 1 -N80- |
q | On right in engine compartment |
q | Valve closed with ignition switched off |
q | When the engine is warm the valve will be activated (pulsed) from the engine control unit |
8 - | Connector |