To avoid injuries to people and/or deterioration of the injection and ignition system the following must be respected: |
t
| Do not touch or remove the ignition cables with the engine running or starting-up. |
t
| Disconnect and connect the cables of the injection and ignition system, including the cables of the measuring equipment, only when the ignition is disconnected. |
t
| To turn the engine at starting speed, without starting it, for example: to check the compression, the Hall transmitter connector must be detached (ignition distributor). |
t
| Do not connect any condenser to terminal 1 (-). |
t
| Do not renew the ignition distributor rotor of 1 kΩ (identification R1) for a different one, not even to protect the radio from static. |
t
| To protect the radio from static use only resistances of 1 k in the high voltage cables Ω and spark plug connectors of 5 kΩ. |
|
|
|