Removing and installing air cleaner |
–
| Remove sealing plugs -1-. |
–
| Remove the securing screws -2- . |
–
| Pull crankcase breather hose -4- off air cleaner housing. |
–
| Unclip ignition cables -5- from air cleaner upper part. |
–
| Installing the air cleaner is carried out in the reverse order. |
–
| Tighten securing screws -2- to 10 Nm. (Ensure the spacer sleeves -3- have been inserted into the air cleaner upper part first.) |
Note! t
| Self-cutting screws have been used as standard to secure the air cleaner lower part to the air cleaner upper part. The threads in the air cleaner upper part or the lower part can be damaged if these screws are loosened or tightened using a power tool. |
t
| For this reason the use of a power tool can only be authorized when: |
t
| The power tool maximum speed is 200 rpm. |
t
| The tightening torque is set to a maximum of 3 Nm |
|
|
|