SEAT Workshop Service and Repair Manuals > Leon Mk1 > Power unit | 4-Cyl. Injection Engine (2 valves, roller rocket finger), Mechanics | Engine assy,cylinder block,crankcase | Removing and installing en- gine

Assembly mounting

Tightening torques

Note!

The assembly mounting securing bolts are stretch bolts and must be replaced.

Engine mounting

A = 50 Nm

B = 25 Nm

C = 25 Nm + 1/8 turn (45°) further

D = 20 Nm + 1/8 turn (45°) further

Gearbox mounting

A = 30 Nm + 1/4 turn (90°) further

B = 20 Nm + 1/8 turn (45°) further

C = 50 Nm

Pendulum support

A = 50 Nm (tighten on nut)

B = 20 Nm + 1/4 turn (90°) further

–	Carry out a test drive and interrogate fault memory: → Vehicle diagnosis, testing and information system VAS 5051

SEAT Workshop Service and Repair Manuals