SEAT Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Enginecrankshaft group, pistons >
< Engine data
Leon Mk1
Power unit
4-cyl. injection engine, (5-valve)
Engine assy,cylinder block,crankcase
Engine: removing and fitting
Engine and gearbox: separation
Engine and gearbox: separation
Special tools and workshop equipment required
t
Counterhold -T20186-
t
Workshop crane
Work sequence
l
Engine/gearbox assembly removed and fixed on engine bracket -T10012-.
–
Unscrew bolt
-1-
with gearbox fitted.
–
Pull the cover plate
-2-
off upwards.
Note
This is shown in the figure with the gearbox removed.
–
Unscrew the bolts
-1 … 8-
on the flange between the engine and the gearbox.
–
Take out starter motor.
Note
The gearbox is shown in illustration with engine removed.
–
Place the support tool -T20186- on the gearbox, as shown in the illustration.
–
Carefully separate the gearbox from the engine, using the workshop crane.
Power unit
4-cyl. injection engine, (5-valve)
Engine assy,cylinder block,crankcase
Engine: removing and fitting
Enginecrankshaft group, pistons >
< Engine data