Leon Mk1
Secondary air system: removing and fitting. |
1 - | Connecting hose |
q | From distributor part in vacuum tank on cylinder head |
2 - | Secondary air inlet valve -N112- |
q | Fixed on cylinder head cover |
3 - | Connector |
q | Black, twin-pole |
4 - | Secondary air pump relay -J299- |
q | Checking: → Vehicle diagnosis, testing and information system VAS 5051 |
5 - | Pressure hose |
q | To combination valve |
q | Check firm seating |
q | Tighten veined part of coupling to unblock |
6 - | Suction line |
q | From upper part of air cleaner |
q | Check firm seating |
q | Tighten ribbed parts of coupling to unblock |
7 - | O-ring |
q | Replace if damaged |
8 - | Secondary air pump motor -V101- |
q | Checking: → Chapter |
9 - | Support |
q | For secondary air pump motor |
q | Secured to intake manifold |
10 - | 10 Nm |
11 - | Connector |
q | Black, twin-pole |
12 - | 10 Nm |
13 - | 10 Nm |
14 - | Support |
q | Fixed in cylinder head |
15 - | Gasket |
q | Replace |
16 - | 25 Nm |
17 - | Intake manifold |
18 - | Cylinder head |
19 - | Pressure hose |
q | From Secondary air pump motor -V101- |
q | Check firm seating |
q | Tighten veined part of coupling to unblock |
20 - | O-ring |
q | Replace if damaged |
21 - | Combination valve |
q | Checking: → Chapter |