Leon Mk1
Assembly overview - intake manifold with attachments (vehicles without intake manifold flap) |
1 - | Guide pipe |
q | For oil dipstick |
2 - | Seal |
q | Replace |
3 - | Seal |
q | Replace |
4 - | 8 Nm |
5 - | Fuel return line |
6 - | 9 Nm |
q |
7 - | Intake manifold |
q | With intake manifold flap motor -V157- and intake manifold flap potentiometer -G336-. |
q | Must not be dismantled |
q | removing and fitting → Chapter |
8 - | Spring retainer |
q | For exhaust gas recirculation cooler changeover valve -N345-. |
9 - | 9 Nm |
10 - | Exhaust gas recirculation cooler changeover valve -N345- |
11 - | Seal |
q | Replace |
12 - | 20 Nm |
13 - | Connecting pipe |
q | To exhaust gas recirculation cooler. |
14 - | Clamp, 5 Nm |
q | Replace |
15 - | Thrust piece |
q | For exhaust gas recirculation |
16 - | 8 Nm |
17 - | Seal |
q | Replace |
18 - | Throttle valve control mechanism -J338- |
q | With throttle valve potentiometer -G69- |
q | removing and fitting → Chapter |
19 - | 8 Nm |
20 - | 9 Nm |
21 - | Clip |