seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Fuel pumpG?6: check > < Measures after filling with the wrong fuel
Emptying fuel tank if it is less than 3/4 full
Emptying fuel tank if it is less than 3/4 full
Altea, Altea XL, Leon
–  Remove rear right seat → Bodywork - Interior fitting work; Rep. gr.72.
Ibiza
–  Fold up rear seat bench.
All other vehicles continued
  WARNING
Fuel supply line is pressurised. Wear safety goggles and protective clothing to avoid possible injury and skin contact. Before loosening hose connections, wrap a cloth around the connection. Then release pressure by carefully pulling hose off connection.
   
–  First check that connector -arrow- is fitted securely by pulling connector without pressing catch. The connector can cause a fault if it has not been fitted correctly.
–  Now pull off connector.
–  Pull fuel lines off flange.
  Note
To do this, press on the connection buttons for the hoses.
  N20-10623
Altea, Altea XL, Leon
–  Open the lock ring with the turning tool -T10202- .
  N20-0638
Ibiza
–  Open locking ring using wrench -3217-.
All other vehicles continued
  A20-0106
–  Lift the fuel supply unit -1-.
–  Insert the suction hose of the fuel extractor -VAS 5190- as far as possible into the fuel tank and extract the fuel.
If fuel tank needed only to be emptied, reinstall sender flange.
  A20-10753

Fuel pumpG?6: check > < Measures after filling with the wrong fuel