Leon Mk1
Assembly overview - exhaust gas recirculation: Engine code ANU |
1 - | O-ring |
q | Renew. |
2 - | Intake manifold |
3 - | Bracket |
4 - | Vacuum hose |
q | To exhaust gas recirculation valve (mechanical) |
5 - | Vacuum hose |
q | To vacuum pipe collective connection brake servo |
6 - | 10 Nm |
7 - | Exhaust gas recirculation valve -N18- (electro-pneumatic) |
8 - | Vacuum hose |
q | To air filter → Item |
9 - | Rubber bush |
10 - | Connector |
q | 2-pin |
11 - | Exhaust manifold |
12 - | Gasket |
q | Renew. |
13 - | 25 Nm |
14 - | Connecting pipe |
q | When installing, tighten all bolts lightly (parts must still just be able to move against one another). Then tighten so parts are free of stress. |
15 - | 25 Nm |
16 - | Intake connecting pipe |
q | With exhaust gas recirculation valve (mechanical) and intake manifold flap |
q | Checking exhaust gas recirculation valve (mechanical) → Chapter |
17 - | 25 Nm |