| –
| First place the Poly-V belt onto the crankshaft pulley. And finally place the Poly-V belt on the tension roller. |
| Continue installation following reverse order for removing. |
Note | t
| Ensure, before installing Poly-V belt, that all ancillaries (alternator, air conditioning compressor) are secured tightly. |
| t
| When fitting the Poly-V belt, ensure that it is fitted with the correct direction of rotation, and that it is correctly seated on the pulleys. |
| When finishing the work, always: |
| –
| Start engine and check belt running. |
|
|
|
