| Attach sensor wheel and gasket to crankshaft |
Note | t
| The sealing flange with the PTFE seal is fitted with a pressure ring on the sealing lip. This pressure ring fulfills the function of an assembly sleeve and cannot be removed before fitting. |
| t
| Once unwrapped, do not separate the sealing flange and the sender wheel or modify the position. |
| t
| The sender wheel finds its position automatically when fitted to the position pin of the fitting device -T10134-. |
| t
| The sealing flange and the seal make up one inseparable component and can only be replaced along with the sender wheel. |
| t
| The position of the centre guide -T10134- with respect to the crankshaft is determined by a guide pin inserted in a threaded space in the crankshaft. |
|
|
|
