Leon Mk1
Front exhaust pipe and catalytic converter with attachments |
Note!
Components marked with * are checked via self-diagnosis: |
1 - | Gasket |
q | Renew. |
2 - | 25 Nm |
q | Renew. |
3 - | Front exhaust pipe |
4 - | Catalytic converter |
5 - | To front silencer |
6 - | Markings |
q | For catalytic converter/front silencer insertion depth → Fig.. |
7 - | Lambda probe after catalytic converter -G130- * 50 Nm |
q | Only for vehicles with engine code AWC. |
q | Remove and install with lambda probe open ring spanner set -3337-. |
q | Grease threads only with hot bolt paste -G 052 112 A3-, hot bolt paste -G 052 112 A3- must not get into the slots of probe body. |
q | If sealing ring is leaking, nip open and renew. |
q | Checking → Rep. Gr.24. |
8 - | Connector |
q | Only for vehicles with engine code AWC. |
q | Black, 4-pin |
q | Contacts 3 and 4 gold-plated |
q | For lambda probe after catalytic converter -G130- and lambda probe heating 1 after catalytic converter -Z29-. |
9 - | Heat shield |
10 - | 10 Nm |
11 - | Securing clip |
12 - | Lambda probe -G39-* 50 Nm |
q | Remove and install with lambda probe open ring spanner set -3337-. |
q | Grease threads only with hot bolt paste -G 052 112 A3-, hot bolt paste -G 052 112 A3- must not get into the slots of probe body. |
q | If sealing ring is leaking, nip open and renew. |
q | Checking (engine code AJH): → Rep. Gr.24. |
q | Checking (engine code AWC) → Rep. Gr.24. |
13 - | Connector |
q | For lambda probe -G39- and lambda probe heating -Z19-. |
Vehicles with engine code AJH: |
q | Black, 4-pin |
Vehicles with engine code AWC: |
q | Black, 6-pin. |
q | Contacts gold-plated. |
14 - | From turbocharger |
15 - | Retaining ring |
q | Renew if damaged. |