seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Position of the piston in the TDC: verification > < Crankshaft: disassembly and assembly

Leon Mk1

Position of the piston in the TDC: verification
Position of the piston in the TDC: verification
Special tools and workshop equipment required
   
t  Bracket -T20026-
Checking process
  Note!
To measure the position of the piston in the TDC, turn the engine in a clockwise direction.
When fitting new pistons or a new engine, always check the piston positions in the TDC, this test is necessary for deciding on the type of cylinder head required.
  W00-2306
–  Carry out the test using the tester and bracket tool -T20026-.
  E13-0026
Piston protrusion (mm)Notch/hole identification
0.66 … 0.861
0.87 … 0.902
0.91 … 1.023

   

Position of the piston in the TDC: verification > < Crankshaft: disassembly and assembly