Leon Mk1
Diagram of coolant hose connections |
1 - | Gear oil cooler |
q | Is only fitted on vehicles with manual gearbox |
2 - | Engine oil cooler |
q | Removing and installing → Chapter. |
3 - | exhaust gas recirculation radiator |
q | Removing and installing → Chapter. |
4 - | Radiator outlet coolant temperature sender -G83- |
q | Removing and installing → Chapter. |
5 - | Coolant temperature sender -G62- |
q | Removing and installing → Chapter. |
6 - | Coolant shut-off valve |
q | Not fitted on all versions |
q | Depending on the production time and the vehicle version |
q | Control by the Climatronic coolant shut-off valve -N422- |
7 - | Bleeder hole |
8 - | Heat exchanger |
q | If renewed, refill system with fresh coolant. |
9 - | Coolant circulation pump -V50- |
q | Only installed in vehicles with Start-Stop system |
10 - | Retaining valve |
11 - | Thermostat with hose |
12 - | Coolant expansion tank |
q | With cap |
q | Checking cooling system for leaks → Chapter. |
13 - | Pump for exhaust gas recirculation cooler -V400- |
14 - | Coolant pump |
q | Removing and installing → Chapter. |
15 - | 4/2-way valve with thermostat |
q | Removing and installing → Chapter. |
q | The thermostat is integrated in the f4/2 way valve and cannot be renewed on its own. |
16 - | Cylinder head and cylinder block |
q | If renewed, refill system with fresh coolant. |
17 - | Radiator for engine coolant |
q | Removing and installing → Chapter. |
q | If renewed, refill system with fresh coolant. |