Leon Mk1
Assembly overview - poly V-belt drive |
1 - | Belt pulley and vibration damper |
q | Assembly through offset holes only possible in one position. |
2 - | 25 Nm |
3 - | Alternator |
4 - | Bracket |
q | For ancillaries. |
q | Removing and installing → Chapter. |
5 - | 20 Nm + turn 180° further |
q | Renew |
6 - | Poly V-belt tensioning element |
7 - | Air conditioner compressor |
8 - | 45 Nm |
9 - | Dowel sleeves |
10 - | Poly V-belt |
q | Mark direction of rotation before removing. |
q | Check for wear. |
q | Do not kink. |
q | Removing and installing → Chapter. |