SEAT Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Fuel system: repairs >
< Repair instructions if tank has been filled with incorrect fuel
Leon Mk1
Power unit
4 cylinder Diesel engine (2.0 litre engine, Common Rail, Generation II)
Fuel supply, gas operation
Parts of fuel supply system
Fuel gauge sendersG: Removing and installing
Fuel gauge senders -G-: Removing and installing
Removal:
Observe safety precautions
→ Chapter
.
Observe rules for cleanliness
→ Chapter
.
–
Remove fuel delivery unit
→ Chapter
.
–
Push the fuel level sender -G- slightly inwards in the
-direction of the arrow-
and at the same time remove upwards in the
-direction of the arrow-
.
–
Unlock the connector tabs
-1 … 3-
, inserting a fine screwdriver through the holes
-arrows-
and disconnect the connectors.
Installation
Install in reverse order to dismantling, noting the following:
Fitting position for fuel level indicator sender -G- cables
I -
Brown Cable
II -
Blue Cable
III -
Black Cable
Note
When mounting the fuel level sender -G- on the supply unit, make sure that the cables are correctly positioned.
–
Insert the fuel gauge sender -G- into the guides on fuel delivery unit and press upwards until it clicks into place.
–
Install fuel delivery unit
→ Chapter
.
Power unit
4 cylinder Diesel engine (2.0 litre engine, Common Rail, Generation II)
Fuel supply, gas operation
Parts of fuel supply system
Fuel system: repairs >
< Repair instructions if tank has been filled with incorrect fuel