seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Measures after filling with the wrong fuel > < Servicing accelerator mechanism

Leon Mk1

Removing and installing fuel filter
Removing and installing fuel filter
Removing
   
–  Open quick-release fasteners -A- and -B- of fuel lines.
  N10-10526
–  Unclip retainer for coolant hose -1-.
  N20-10806
–  Undo securing bolts and nuts -arrows-.
  N20-10821
–  Electrical connectors -1- and -3-, open clip -2- and pull off fuel supply line.
  A23-10452
–  Pull fuel return hose -5- off fuel return line.
–  Remove fuel filter upwards.
–  Catch any escaping fuel.
Installing
Installation is in the reverse sequence of removal. Observe the following:
t  Route fuel hoses without kinking.
t  Ensure that fuel hose connections are tight.
t  Do not interchange fuel supply and return lines (return line is blue or with blue markings and supply line is white or with white markings).
t  Clip fuel and coolant hoses into retainers again.
–  Bleed air from fuel system → Chapter
  N23-10474

Measures after filling with the wrong fuel > < Servicing accelerator mechanism