Checking the thermostat at bypass: |
–
| Removing the work element → Item |
–
| Heating the work element in a bath of coolant. |
Opening begins: ca. 75 °C |
Opening begins: ca. 85 °C |
Position for fitting the thermostat at bypass: |
Thermostat at bypass for the gear oil cooling circuit: |
| The arrow on the lower element on the case points to the heating heat exchange. |
Thermostat at bypass for the turbo-charger cooling circuit: |
| The arrow on the lower element of the case points to the coolant circulation pump -V50-. |
|
|
|