seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Enginecrankshaft group, pistons > < Interrogate the event memory

Leon Mk1

Vehicles with air conditioning/heating: additional instructions and assembly information
Vehicles with air conditioning/heating: additional instructions and assembly information
  Note
Do not open the refrigerant circuit In order to avoid damage to the condenser or the pipes/hoses of the refrigerant, avoid pulling, bending or twisting excessively.
To facilitate removing and installing the engine without opening the refrigerant circuit:
–  Remove retaining clamp(s) for refrigerant lines.
–  Remove poly V-belt → Chapter.
–  Install the lock carrier plate and the attached pieces: → General body repairs, exterior; Rep. gr.50
–  Remove air conditioner compressor from bracket with refrigerant lines still connected: → Heating, air conditioning; Rep. gr.87
–  Place lock carrier with radiator and condenser on the side so that there is no stress on the refrigerant lines and hoses.
   

Enginecrankshaft group, pistons > < Interrogate the event memory