–
| Pull bleeder hose -1- from activated charcoal filter on activated charcoal filter solenoid valve 1 -N80--2-. |
–
| Connect hand vacuum pump -VAS 6213- as shown to hose -1-. |
–
| Operate hand vacuum pump -VAS 6213- several times. Vacuum must not build up. |
–
| Check breather opening -3- on lower activated charcoal filter -4- for soiling, clean if necessary. |
If a vacuum does not build up: |
–
| Temporarily seal breather opening -3- and operate vacuum pump again several times. A vacuum must build up. |
If a vacuum does not build up: |
–
| Renew active carbon filter. |
|
|
|