–
| Restart the diagnosis using the segment -arrow-. |
If no fault is registered, close the window with X button. |
–
| End the diagnosis with the F10 button. |
If a fault is registered, proceed as follows: |
–
| Check the lines and connections according to the circuit diagram, when necessary, repair or replace the component. |
t
| Valve for the gas tank -N495- |
t
| Sensor for the gas distribution rail -G401- |
t
| Intake manifold pressure sender -G71- |
t
| Sender for the gas supply display -G707- |
t
| Gas injector 1 -N366- to gas injector 4 -N369- |
–
| After completing the repair, erase fault memory → Chapter. |
|
|
|