Leon Mk1
Electronic power control (EPC) - Components overview |
1 - | 6-pin connector |
2 - | Accelerator pedal module with accelerator position sender -G79- y Accelerator pedal position sender -2- -G185- |
q | Not adjustable. |
q | The position of the accelerator pedal is communicated to the engine control unit by the accelerator position senders (variable resistors, both fitted in a single housing) which are connected to the accelerator pedal |
q | -A- Space in which the pressure tool -T10238- should be inserted (left-hand drive vehicles) or the pressure tool -T10240- (right-hand drive vehicles) |
q | removing and installing → Chapter |
q | Kick-down function: autoadapter - Vehicles with automatic gearbox → Vehicle diagnostic, testing and information system VAS 5051 |
3 - | 10 Nm |
4 - | Cap |