Leon Mk1
| Analysis measurement value blocks, display group 100 -conformity code- |
| Display group 100 -conformity code- | ||||||||
| ||||||||
| Read measur. value block 100 | → | ◂ The display reads | ||||||
| xxxxxxxx | xxx.x °C | xxx.x s | xxxxxxxx | |||||
| 1 | 2 | 3 | 4 | ◂ Display fields | Target value | Analysis | ||
| Diagnostic state | -- | -- | ||||||
| Time since engine start-up | -- | -- | ||||||
| Coolant temperature | 80.0...110.0 °C | -- | ||||||
| Conformity code | 00000000 | → Anchor | ||||||
| Meaning of the 8-digit numerical block, display field 1 - conformity code |
| All digits must be “0” before generating the conformity code | ||||||||
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | Diagnostic function |
| 0 | Catalyst | |||||||
| 0 | Catalyst heating (at this time there is no diagnosis/always “0”) | |||||||
| 0 | Activated charcoal filter system (filter deaeration system) | |||||||
| 0 | Secondary air system (does not exist/always “0”) | |||||||
| 0 | Air conditioning(at this time there is no diagnosis/always “0”) | |||||||
| 0 | Lambda probes | |||||||
| 0 | Lambda probe heating | |||||||
| 0 | Exhaust gas recirculation | |||||||
