seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Activate the fuel pump relay J17 > < Activate the exhaust recirculation valve N18 :
Indicate the engine revs signal:
Indicate the engine revs signal:
  Note!
This test is only possible on vehicles equipped with a rev counter. On the vehicles without rev counter, the final control diagnosis can be continued by pressing the key , when the following message appears.
–  Press .
   
Reading on display:
The rev counter should read approx. 3000 rpm until the key is pressed to activate the following activator.
If no there is no reading:
–  Test the wiring to the rev counter Rev signal: testing → Chapter
 
Final control diagnosis                →
Engine revs signal                      

Activate the fuel pump relay J17 > < Activate the exhaust recirculation valve N18 :