seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Work sequence > < Test conditions
Test conditions for vehicles with air conditioning
Test conditions for vehicles with air conditioning
l  The vehicle is at ambient temperature (over +15 °C).
l  Air conditioning on.
l  Minimum temperature and maximum blower speed, preselected.
  Note!
t  The final control diagnosis can only be carried out with the engine off and the ignition on.
t  The final control diagnosis is interrupted when the engine is started or a turnover pulse is detected.
t  During the final control diagnosis, the different activators remain activated until you go on to the following activator pressing →.
t  The activators are tested by sound or by touch.
   

Work sequence > < Test conditions