seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Continuation of the test if the activated charcoal filter solenoid valve 1 does not click: > < Activate the fuel pump relay J17
Test the electrical connection to the air conditioning system:
Test the electrical connection to the air conditioning system:
  Note!
The test is only for vehicles equipped with air conditioning. In the case of vehicles without air conditioning, you can end the final control diagnosis by pressing the key when the following message appears.
   
Reading on display:
The magnetic connection of the air conditioning compressor should click until the key is pressed to end the final control diagnosis.
If the magnetic connection does not click:
–  Test the wiring from/to the air conditioning system → Chapter.
If the magnetic connection clicks:
–  Press .
 
Final control diagnosis                →
AC engine/compressor electr. connection 
Reading on display:
–  Press 0 and 6 for the function “End transmission” and confirm the entry with the Q key.
 
Rapid data transmission             HELP
Select function XX                      
Reading on display:
–  Switch off the ignition.
 
Rapid data transmission             HELP
Enter address code XX                   

Continuation of the test if the activated charcoal filter solenoid valve 1 does not click: > < Activate the fuel pump relay J17