Leon Mk1
| ABS |
| 1 - | ABS control unit -J104- |
| q | Installation location: on hydraulic unit, on left in engine compartment, under battery tray. |
| q | Do not separate connector before successfully completing self-diagnosis. Switch ignition off before separating connector. |
| q | removing and installing → Chapter |
| 2 - | ABS hydraulic unit -N55- |
| The hydraulic unit consists of the components: |
| q | ABS return flow pump -V39- |
| q | Valve block (contains inlet and outlet valves). |
| q | ABS return flow pump -V39- and valve block should not be separated from each other |
| q | removing and installing → Chapter |
| 3 - | Traction control system warning lamp -K86- |
| q | Installation location: On the instrument panel |
| 4 - | ABS warning lamp -K47- |
| q | Installation location: On the instrument panel |
| 5 - | Brake system warning lamp -K118- |
| q | Installation location: On the instrument panel |
| 6 - | Parking brake warning lamp -K139- |
| q | Installation location: On the instrument panel |
| 7 - | Diagnostics connection |
| q | Installation location: driver footwell cover |
| 8 - | Brake light switch -F- |
| q | Including brake pedal switch -F47-. |
| q | removing and installing → Chapter |
| 9 - | Front right/left speed sensor -G45-/-G47- |
| q | removing and installing → Chapter |
| 10 - | Rear right/left speed sensor -G44-/-G46- |
| q | Removing and installing (drum brakes) → Chapter |
| 11 - | Wheel hub with wheel bearing |
| q | ABS sensor ring is installed in wheel bearing. |
| 12 - | Wheel hub with wheel bearing |
| q | ABS sensor ring is installed in wheel bearing. |
