| l
| Piston is pressed back. |
| l
| The brake pads are seated on the brake back plate. |
| –
| Secure brake caliper to brake carrier with new self-locking bolts → Item. |
| –
| Screw brake line onto brake caliper → Item. |
| –
| Hook the hand brake cable and fasten it to the support with the spring clip. |
Note | t
| Press several times on the brake pedal fully with the vehicle stationary, so that the brake pads sit correctly into their service position. |
| t
| Check the brake fluid level and refill in case of doubt. |
|
|
|
