seat Workshop Repair Guides

SEAT Leon Workshop Service & Auto Repair Manuals

ABOUT US
Brake disc CR38 HR A: Removing and installing.|Installation > < Brake disc CR38 HR A: Removing and installing.

Removing and Installing Rear Wheel Disc Brake - Brake Disc CR38 HR A: Removal

Removal:
Removal:
  Note
Always replace per axle.
–  Remove the brake pads → Chapter.
  WARNING
Do not leave brake calliper hanging from brake hose but secure it to bodywork using a suitable cable tie or wire. Take care that brake hose is not damaged by weight of brake components.
Do not apply brake when brake calliper is removed.
–  Remove and install the brake anchor plate by removing the locating bolts on the wheel bearing housing → Item.
   
–  Remove locating bolt -arrow- from brake disc, holding brake disc in position.
  Note
Do not use force to separate the brake from the wheel stock, use deoxidant if necessary, as the brake disc could be damaged.
–  Remove brake disc.
  A46-10018

Brake disc CR38 HR A: Removing and installing.|Installation > < Brake disc CR38 HR A: Removing and installing.