seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Brake pipes and brake hoses: > < Removal:

Leon Mk1

Fitting
Fitting
–  The piston and join ring surfaces can only be cleaned using alcohol and immediately dried.
–  Before fitting the piston and seal ring, apply a thin coating of assembly paste → Parts catalogue
–  Insert sealing ring in brake calliper housing.
   
–  Place outer sealing lip of protective cap on the piston
  N47-0079
–  Insert the inside sealing lip into the groove of the cylinder using the lever -U 30800-.
  Note
When doing this hold piston in front of calliper housing.
  E47-0027
–  Insert the brake calliper piston using the tool -T20055A -.
  Note
The outer sealing lip of the protective cap will then locate in the groove on the piston.
  E46-0050

Brake pipes and brake hoses: > < Removal: