seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Installing > < Removing and installing brake master cylinder
Removing
Removing
–  Note or request radio code on vehicles with coded radio if necessary.
–  Disconnect battery.
Vehicles with ABS or ABS/EDL
–  Remove control unit and hydraulic unit → Chapter.
Continued for all vehicles
–  Lay out sufficient lint free clothes in area of plenum chamber, engine and gearbox.
–  Draw off as much brake fluid as possible from brake fluid reservoir using a suction bottle.
–  Pull connector off brake fluid level switch.
–  Disconnect brake pipes on brake master cylinder and seal brake pipes with plugs from repair kit -1H0 698 311 A-.
–  Unscrew brake master cylinder nuts.
–  Carefully take brake master cylinder out of brake servo unit.
   

Installing > < Removing and installing brake master cylinder