Leon Mk1
1 - | Protective seal |
2 - | Bleed valve |
q | Apply a thin coat of fitting paste -G 052 152 A2- to the threads before screwing in |
3 - | Brake caliper housing |
4 - | Self-locking hexagon bolt, 35 Nm |
q | Renew |
q | When loosening and tightening counter-hold on guide pin |
5 - | Seal |
q | Take out using wedge -U-30800- → Chapter |
6 - | Piston |
q | Removing and installing → Chapter |
q | First apply a thin coat of fitting paste -G 052 150 A2-. |
7 - | Protective seal |
q | Do not damage when inserting piston |
8 - | Brake carrier with guide pins and protective caps |
q | Brake carrier with guide pins and protective cap |
q | Supplied as replacement part assembled with sufficient grease on guide pins |
q | If protective caps or guide pins are damaged use repair kit. Use grease sachet supplied to lubricate guide pins. |