Note | t
| The valve set must be replaced for each tyre change. |
| t
| The metal valve and wheel electronics may be reused. |
| –
| Check for any loose or damaged components. |
| –
| Check the condition of the rims (rust, dirt, deformations, etc.). |
Note | Do not use metal valve fitting equipment on aluminium rims. |
| –
| Lubricate and fit the valve to the rim using the valve fitting equipment. |
| –
| Rotate the valve using a corresponding tube spanner. |
| –
| Verify the tightening torque. |
|
|
|
