seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Specified torque for fitting wheels > < Removing and installing the wheels

Leon Mk1

Fitting tyre
Fitting tyre
  Note
t  If you are using tyre levers, first release the tyre on the side opposite the valves.
t  Use tyre levers with plastic protection for aluminium rims.
   
t  Do not use tyre levers in the zone -a-.
–  Set the taper head as near to the valve as possible so that the positioning of the lever about 30° -b- next to the valve is possible.
–  Begin rotating the wheel until the bead has been completely released on the opposite side of the valve.
–  Lift the tyre and repeat the operation on the opposite bead.
  A44-0087

Specified torque for fitting wheels > < Removing and installing the wheels