seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Repair the passenger compartment lights > < Headlight range adjustment control unitJ431: Removing and installing

Leon Mk1

Switch module of the window regulator, driver's side, remove and install
Switch module of the window regulator, driver's side, remove and install
Special tools and workshop equipment required
   
t  Removal wedge -VAS 3409-
  Note
When removing and installing components that are in view (switches, covers, trim and so on), mask off areas in which tools (removal wedge -VAS 3409-, screwdriver) are used to lever out those components using commercially available tape.
Removing:
–  Switch off ignition and all electrical loads, and pull out ignition key.
  W00-0016
–  Carefully lever out mounting frame -1- backwards from door panel trim using removal wedge -VAS 3409--2- or suitable screwdriver.
  N96-10889
–  Release and detach connectors -arrows- and remove mounting frame.
  N96-10158
–  Release locking lugs -arrows- and remove switch module for window regulator from mounting frame.
Installing:
Installation is carried out in reverse order.
  N96-10157

Repair the passenger compartment lights > < Headlight range adjustment control unitJ431: Removing and installing