seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Turn signal repeater and entry light in exterior mirror > < Lock cylinder and ignition/starter switch
AFS-Headlamps (Bi-Xenon, gas discharge) with LED - Component overview
   
AFS-Headlamps (Bi-Xenon, gas discharge) with LED - Component overview
1 - Headlight housing
q   Removing and installing → Chapter
2 - Power output module
q   Power module for left headlight -J667-
q   Power module for right headlight -J668-
3 - Bolt.
q   Bracket for the power output module on the headlight, 2 x, tightening torque 4.5 Nm
4 - Turn signal light bulb
q   12 V, PY 21 W
q   orange
q   Renewing bulbs → Chapter
5 - Bulb carrier
q   For turn signal indicator
6 - Housing cover
q   For turn signal indicator
7 - Housing cover
8 - Gas discharge bulb control unit
q   For headlight (left-side) -J343-
q   For headlight (right-side) -J344-
q   Removing and installing → Chapter
9 - Gas discharge lamp for dipped / main beam
q   35 W, D1S
q   Renewing bulbs → Chapter
10 - Headlight range control motor
q   For headlight (left-side) -V48-
q   For headlight (right-side) -V49-
q   Removing and installing → Chapter
11 - Bolt.
q   Bracket for the headlight, 3 x, tightening torque 4.5 Nm
12 - LEDs for sidelights / daytime running lights
q   15 LEDs
q   Changing the LEDs → Chapter

   
Allocation of contacts in the AFS headlamp unit connector
1 - AFS CAN BUS HIGH
2 - AFS CAN BUS LOW
3 - AFS CAN BUS shield
4 - Terminal 15 (AFS module)
5 - Terminal 31 for GDL module (earth)
6 - Terminal 56b for GDL power supply
7 - Terminal 31 (common earth)
8 - Terminal 56a/1 additional route
9 - Flasher bulb supply
10 - 30 (power supply) for sidelights / daytime running lights
11 - Terminal 56a/2 route diaphragm
12 - PWM for daytime running light and sidelight
13 - not used
14 - Terminal 31 for AFS module and cornering light (earth)
  E94-10171

Turn signal repeater and entry light in exterior mirror > < Lock cylinder and ignition/starter switch