–
| Disconnect earth connector -3- and connector -4-. |
–
| Release spring clip -2- and swing out. |
–
| Pull bulb -1- out of housing. |
Note! Do not touch bulb glass when fitting a new bulb. Fingers leave traces of grease on the glass, which evaporate when the bulb is switched on and cause the glass to cloud over. |
–
| Insert new bulb so that the recess in the bulb holder aligns with guide lug of housing. |
–
| Remainder of installation is carried out in the reverse sequence. |
–
| After installing a new bulb check fog light settings → Booklet10.1. |
|
|
|