–
| Twist the casing of the lamp in the direction of the arrow and remove it from the block. |
–
| Remove the bulb from the lamp holder. |
–
| Put the new bulb into the bulb holder. |
–
| Replace the casing of the bulb, in the block. |
Note! t
| Take care not to rub the bulb during installation. Fingerprints of oil left on the bulb will evaporate when the lamp is lit and smudge the lamp. |
t
| While mounting, ensure that the casing is fully inserted into the block by turning it in the opposite direction to the arrow. |
|
|
|