seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Repairing headlight retaining tabs > < Headlight with halogen bulbs
Repairing upper retaining tab
Repairing upper retaining tab
Special tools and workshop equipment required
   
t  Torque screwdriver -V.A.G 1624-
  Note
t  On the top of the headlight are two securing tabs.
t  The following description is for one retaining tab.
t  The repair of both retaining tabs follows the same sequence.
–  Switch off ignition and all electrical loads, and pull out ignition key.
–  Remove headlight
  W00-0984
–  Remove residue of old headlight retaining tab -1- as shown in illustration.
–  Fit new retaining tab -2- onto base of headlight, ensuring a positive fit, and tighten screws -3- to 1.0 Nm.
–  Install headlight.
–  Check the adjustment of the headlamp and adjust when necessary, see „maintenance to be considered precisely“: → Booklet701.
  N94-12210

Repairing headlight retaining tabs > < Headlight with halogen bulbs