SEAT Workshop Service and Repair Manuals > Leon Mk1 > Vehicle electrics | Electrical system | Lights, lamps, switches outside | Main beams with gas discharge lamps (Bi-xenon)

Removing and installing front left vehicle level senderG78

Removing and installing front left vehicle level sender -G78-

Special tools and workshop equipment required

t	Torque wrench -SAT 8010-

Note

according to the versions ▶ 22.08

Removing:

–	Disconnect ignition and all electrical loads, and remove ignition key.

–	Unplug electrical connector -arrow-.

–	Unscrew hexagon nut -1-.

–	Undo the fastening bolt -2- and remove the left front vehicle level sender -G78--3-.

Installing:

Installation is carried out in the reverse order, noting the following:

–	Tighten nuts and bolts to the torques shown.

–	Check the front left vehicle level sender -G78- → Chapter.

–	Carry out the headlight adjustment → Booklet101.

Note

t	If the vehicle level senders are replaced, the values of the senders must be checked → Chapter and the basic adjustment of headlamps made → Booklet 101.

t	If the values of the vehicle level senders are outside the margin of tolerance, the basic headlamp adjustment can not be carried out.

SEAT Workshop Service and Repair Manuals