seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Rear lights > < Fitting the bulbholder
Removing and installing turn signal bulb in exterior mirror
Removing and installing turn signal bulb in exterior mirror
  Note!
t  Vehicles with a turn signal repeater in the exterior mirror do not have a turn signal repeater in the wing.
t  Long-lasting light emitting diodes (LEDs), rather than conventional bulbs, are installed in the mirror housing repeater turn signals.
t  In the event of damage, the entire turn signal must be renewed.
Removing:
–  Switch off ignition and all electrical consumers and remove ignition key.
–  Remove driver side exterior mirror turn signal -L131- unit or front passenger side exterior mirror turn signal -L132- unit → General body repairs, exterior; Rep. Gr.66.
Installing:
–  Install driver side exterior mirror turn signal -L131- unit or front passenger side exterior mirror turn signal -L132- unit → General body repairs, exterior; Rep. Gr.66.
   

Rear lights > < Fitting the bulbholder