SEAT Workshop Service and Repair Manuals > Leon Mk1 > Vehicle electrics | Electrical system | Lights, lamps, switches outside | Steering column combined switch until 10.05

Horn switch: Removing and installing

Removing

–	Removing the driver's airbag: → Interior body installation work; Rep. Gr.69

–	Unscrew the bolts -arrows- from the contact plate.

–	Release connectors and remove the contact plates.

Note

Make sure that the surfaces of the contact plates and the steering wheel bolts -arrows- are clean before assembling (no rust or grease).

Installing

Fitting is carried out in the reverse order.

SEAT Workshop Service and Repair Manuals